Steel Boiler built by Harry Holt of Pidsea East Yorkshire.The steam dome
was modified so as to make the fitting of the regulator valve and
assembly
easier,as on the original drawings of the boiler it was a difficult job
to fit anything in the confined space as you have to reach down inside.
As I fit teflon ball valve regulator's this mod make's it much
easier.The smokebox is detatchable from the main barrel and is secured
by four contersink socket head screws,as I wanted to keep the profile of
the boiler the same as the original drawing,the steam dome is in the
center of the boiler and there is a bush at the front for the top feed
as I had on a previous Romulus.
.
